16 Pcs MG90s Mini Servo Motors Kit for Robot Helicopter Airplane Car Boat Control

Features:

The MG90s micro servo motor is small, lightweight, and has low power consumption. It is reliable and easy to operate, with good stability. This servo motor can easily detect and configure the server virtual bit, jitter, and average position. It is ideal for use in RC helicopters, micro robots, robotic arms, boats, and most types of RC toys. However, it is important to note that due to its reduced pulling force, it is recommended only for ordinary small electric aircraft models, and not for large fixed-wing and electric helicopters.

Specifications:

• Model: MG90s
• Weight: 13.4 g
• Stall torque: 1.8kg/cm(4.8V), 2.2kg/cm(6.0V)
• Operating speed: 0.1 sec/60 degrees (4.8V), 0.08sec/60 degrees (6.0V)
• Operating voltage: 4.8V to 6.0V
• Temperature range: 0 to +55 degrees Celsius
• Maximum rotation angle: 180 degrees
• Dead band width: 5us
• Gear material: plastic
• Working mode: simulation

Package Includes:

The package contains 16 MG90s 9G micro servos. Please note that manual measurements may result in slight errors in size. Additionally, there may be a slight difference in color due to variations in screen displays. As small parts are included, adult supervision is required when handling for individuals under 3 years old. The product is suitable for individuals over 12 years old.

Adequate Quantity:

The package includes 16 pieces of MG90s micro servo motors, along with multi-arms and fixing screws. This complete set is easy to use and provides a sufficient quantity for prolonged use.

Mini Size:

The MG90s micro servo motor is mini and lightweight, measuring approximately 0.9 x 0.48 x 1.12 inches (2.28 x 1.22 x 2.85 cm). It has a stall torque of 1.8 kg/cm (4.8V) and 2.2kg/cm (6.0V). The operating voltage ranges from 4.8V to 6.0V, with a temperature range of 0 to +55 degrees Celsius, and a dead band width of 5 microseconds. Before ordering, please review the specification table carefully.

Interface Type:

The RC car micro servo is compatible with JR and FUTABA interfaces. It operates at an operating speed of 0.1 sec/60 degrees (4.8V) and 0.08sec/60 degrees (6.0V), with a maximum running angle of 180 degrees.

Easy to Use:

The servo motor for RC features three wire interfaces that should be connected as follows: red wire - power line, brown wire - ground, yellow wire - signal line. The product is small, consumes low power, is reliable, easy to operate, and offers good stability. It can easily detect and configure the server virtual bit, jitter, and average position.

Scope of Application:

The MG90s 9g micro servo motor is suitable for use in RC helicopters, micro robots, robotic arms, boats, and most types of RC toys. It is important to note that due to its reduced pulling force, it is recommended only for ordinary small electric aircraft models, and not for large fixed-wing and electric helicopters.

product information: